Chinese Website Contact us
Support
Website
Tec1654 DC brushless motor
Release Date:2020-05-06

Advantages of brushless motors:

1. Fully replace DC motor speed regulation, fully replace inverter + frequency conversion motor speed regulation, fully replace asynchronous motor + reducer speed regulation;

2. Can run at low speed and high power, can save the reducer to directly drive a large load;

3. It has all the advantages of the traditional DC motor, while eliminating the carbon brush and slip ring structure;

4. Excellent torque characteristics, good torque performance at medium and low speeds, large starting torque and small starting current;

5. Stepless speed regulation, wide range of speed regulation, strong overload capacity;

6. Small size, light weight and large output;

7. Soft start and soft stop, good braking characteristics, can save the original mechanical brake or electromagnetic brake device;

8. High efficiency, the motor itself has no excitation loss and carbon brush loss, eliminating multi-stage deceleration consumption, the comprehensive power saving rate can reach 20% to 60%, only one power saving item can recover the purchase cost in one year;

9. Brushless motor has high reliability, good stability, strong adaptability, and simple repair and maintenance;

10. Resistant to bumpy vibration, low noise, small vibration, smooth operation and long life;

11. No sparks, especially suitable for public places, with good safety performance.

TEC1654 product features:

Brushless DC motors use Hall components as position sensors to replace the commutator and brush parts of brushed DC motors, and electronic commutation replaces mechanical commutation. Ordinary DC motors use mechanical brushes to perform mechanical commutation. Electromagnetic interference is generated, the noise is large, and the loss of the brush also causes the reliability of the motor to be poor. In order to overcome the shortcomings caused by the mechanical commutation, the brushless motor came into being.

1. Adopt electronic drive controller to achieve electronic commutation instead of mechanical instead of mechanical contact commutation. There is no electrical contact sparks and wear of brushes and commutator. The electromagnetic interference is small, it can work at high speed, the motor runs smoothly, and the service life is long 10000 hours, high working reliability.

2. The stator on the motor structure is in contact with the chassis, the heat dissipation area is large, and the heat dissipation effect is good. The rotor uses rare earth neodymium iron boron, cup winding, almost no loss and heat, and high efficiency.

3. The electronic circuit is separated from the motor body to achieve good control of the motor. By changing the logic signal sequence, the motor is forward / reverse, by changing the logic duty cycle of the PWM, the motor speed control is achieved, and the position sensor is used. Speed closed loop can be realized, so that the motor can run stably at a certain speed.

This product is widely used in tattoo machines, polishing machines, engraving machines, medical products and other purposes. It has low noise during operation and the speed can be adjusted by voltage.


Contact us

Tel:0755-81446976 / 27322885 13534099210 Mr.Yao
Fax:0755-27323276
E-mail:zys@sz-zys.com
Add:2F, Building C1, North Yongfa Technology Park, Linpo Mountain, Shajing, Baoan District, Shenzhen

Line: Alibaba
Online